SMA BLUETOOTH REPEATER - Manual (Page 20)

Decommissioning SMA Solar Technology AG
20 BTREPIN-IA-IEN100211 Installation Manual
9 Decommissioning
9.1 Detaching the SMA Bluetooth Repeater from the wall
1. Disconnect the SMA Bluetooth Repeater from the power supply.
• If the SMA Bluetooth Repeater is connected to the plug-in power supply, pull the mains plug
from the socket-outlet and remove the plug-in power supply plug from the
SMA Bluetooth Repeater.
• If the SMA Bluetooth Repeater is connected to the Power Modul, disconnect and open the
inverter with installed Power Modul (see inverter installation manual) and remove the
2-pole plug from the "Power 12V" terminal on the SMA Bluetooth Repeater.
2. Push the SMA Bluetooth Repeater upwards and
use a screwdriver to press it against the bracket.
3. Slide the SMA Bluetooth Repeater upwards away from the bracket.
4. Unscrew the screw from the wall and remove the bracket.
5. If the SMA Bluetooth Repeater was connected to the Power Modul, remove the cable
connection from the Power Modul (see Power Modul manual).