SMA BLUETOOTH REPEATER - Manual (Page 16)

Electrical Connection SMA Solar Technology AG
16 BTREPIN-IA-IEN100211 Installation Manual
6 Electrical Connection
6.1 Connect the SMA Bluetooth Repeater to the power supply using
the plug-in power supply
1. Connect the country-specific socket-outlet adapter to the plug-in power supply; it snaps into
place when inserted correctly.
2. Insert the plug-in power supply plug into the "Power 12V" terminal of the
SMA Bluetooth Repeater.
3. Plug the plug-in power supply mains plug into the socket-outlet.
☑ The "RDY" LED on the SMA Bluetooth Repeater lights up. The SMA Bluetooth Repeater is
connected to the power supply.
✖ The "RDY" LED is not lit or is blinking?
• See section 10.1 "Power Supply", page 22.
Danger of fire due to incorrect plug-in power supply
Technically unsuitable plug-in power supplies may cause a short circuit or a fire.
• Use the plug-in power supply intended as an accessory for the SMA Bluetooth Repeater.