SMA SB 3300-11 - Manual (Page 13)

SMA Solar Technology AG Display
User Manual SB33_38-BA-BEN114230 13
4.3 Display Messages during a Disturbance
In the event of a disturbance, the inverter displays the status "Disturbance" and an error message.
Inform your installer. The following messages will be displayed:
4.4 DC Overvoltage
Display message Description
Energy generated on the current day
Status message "MPP"
Current feed-in power
Voltage of the PV array
After a further 5 seconds or a tap, the current values
of the reactive power Qac and of the displacement
power factor cos φ (PF) are displayed.
Total amount of energy fed in
Total number of operating hours in feed-in operation
Display message Description
Energy generated on the current day
Status message "Disturbance"
Operating state
Error message
Measured value at the time of the disturbance
Current measured value (only displayed if a
measured value is responsible for the disturbance)
Display message Description
The DC input voltage is too high at the inverter.
Inform your installer immediately!
E-today 0Wh
Mode MPP
E-today 0Wh
Mode Disturbance
Disturbance
Vac-Bfr
!PV-Overvoltage!
!DISCONNECT DC!