SMA STP 8000TL-10 - Manual (Page 52)

6 Electrical Connection SMA Solar Technology AG
52 STP8-17TL-IA-en-31 Installation Manual
6.5.3 Setting the Country Standard and Language using the
Rotary Switch
1. Disconnect the inverter (see Section 9 "Disconnecting the Inverter from Voltage Sources",
page 63).
2. Set the arrows on the rotary switches (A and B) to
the required position using a screwdriver
(see Section 6.5.1 "Checking the Country
Standard", page 47). Use a screwdriver with blade
width 2.5 mm.
3. Restart the inverter (see Section 7 "Commissioning", page 58).
Jumper for English language
You can also adjust the language to English by
means of a jumper (e.g. for service purposes).
• To do so, plug the jumper onto the upper two
pins as shown on the right.