SMA WB 5000A-11 Installation - Manual (Page 32)

Electrical Connection SMA Solar Technology AG
32 WB5A_6A-IA-IEN114540 Installation Manual
4. Slide the screw joint up to the thread and fasten with a torque of 2 Nm.
☑ The DC connectors are assembled and can now be connected to the inverter as described in
Section 5.4.4 "Connecting the Small Wind Turbine System (DC)" (page 34).
☑ If the stranded wires are not visible, the
cable is not correctly inserted.
• Loosen the clamping bracket. To do so,
insert a screwdriver into the clamping
bracket to lever it open
(blade width: 3.5 mm).
• Remove the cable and go back to step 1.
Result Measure
+