SMA WB 5000A-11 Installation - Manual (Page 74)

Decommissioning SMA Solar Technology AG
74 WB5A_6A-IA-IEN114540 Installation Manual
10 Decommissioning
10.1 Disassembling the Inverter
1. Open the enclosure lid as described in Section 7.2 "Opening the Inverter" (page 57).
2. Remove all cables from the inverter.
3. Close the inverter with the 6 screws and the
corresponding conical spring washers.
4. Remove the ventilation grids on both sides.
5. Remove the 2 screws on the left and right side of the
inverter that attach it to the wall mounting bracket.
6. Disconnect the anti-theft protection, if applicable.