Yaskawa 1000 Series Operator Mounting Kit NEMA Type 4X - Manual (Page 11)

3 Receiving
YASKAWA TOEP YEAOPT 02A 1000 Series Operator Mounting Kit NEMA Type 4X/IP66 11
◆
Tool Requirements
Table 4 lists the tools required to install the mounting kit with digital operator on the door of
the enclosure panel.
Table 4 Required Tools
Quantity 1 ea.
UWR0051
Digital Operator Cable 3 ft:
Used to connect the digital operator to the
drive.
Quantity 1 ea.
UWR0052
Digital Operator cable 10 ft:
Used to connect the digital operator to the
drive.
<1> Carefully remove the inner protective plastic film from the mounting bracket membrane prior to kit installation.
The outer protective film can be removed after installation is complete.
Tool Description
Phillips screwdriver #2 For M3 x 6 screw
Select one:
11/32 inch box end wrench, socket wrench, nut driver or adjustable
wrench.
For #8-32 nut
Select one:
3/8 inch box end wrench, socket wrench, nut driver or adjustable wrench.
For #10-32 nut
Item Yaskawa Part Number Description