Yaskawa AC Servomotor Linear (Sigma) Series - Manual (Page 9)

4 NOTES FOR SAFE OPERATION
E-7
„ INSTALLATION
• When unpacking and installing magnetic way, chek that no medtal fragments or magnetized objects near the
stator because they may be affected by the magnetic attraction of the magnetic way.
Failure to observe this caution may result in injury or damage to the magnedic way’s magnets.
• Do not use the magnetic way near metal or other magnetized objects.
Failure to observe this caution may result in injury.
• Do not place any electronic devices such as clocks, magnetic cards, storage media, or measuring devices
close to the magnet track.
Failure to observe this caution may result in malfunction or mechanical failure of the electronic devices.
• Do not stand or sit on the linear servomotor, place heavy objects on it, or lean heavy objects against it.
Failure to observe this caution may result in injury.
• Securely mount the linear servomotor on to the machine.
If the linear servomotor is not mounted securely, it may loosen during operation.
• Install the linear servomotor in the following location.
• Away from direct sunlight.
• Away from corrosive or flammable gases.
• Well-ventilated and free from dust, moisture, salts, and iron dust.
• Ambient temperature of 0
°C to 40°C.
• Relative humidity of 20% to 80% (non-condensing)
• Inspection and cleaning can be performed easily.
• Free from shock or vibration.
If the location is subject to the splashing of water or oil. attach a cover to protect the linear servomotor.
• Do not apply any strong force.
Failure to observe this caution may result in product failure.
• Be sure to install the product in the correct direction.
Failure to observe this caution may result in malfunction.
• Adjust the gap between the moving coil and the magnet track to within the limits specified in the technical
documents fro each model.
• Do not allow foreign matter to enter the gap between the moving coil and the magnet track.
Failure to observe this caution may result in fire or product failure.
• Securely tighten the linear servomotor mounting bolts. Take precautions to ensure the bolts will not become
loose.
• Use the accessories for models that are packed together with washers.
Applicable models: SGLTM-{{{{{†Y
• Only use alcohol when using a solvent to clean the linear servomotor.
Other solvents may cause product failure.
• Do not modify the linear servomotor.
CAUTION