Yaskawa MicroTrac DSD Drives Digital Tach - Manual (Page 4)

4
Table 1 Digital Tach and I/O PCB PAC Definitions
NODE: 250. When connected to J9 of Main CPU Control PCB
251. When connected to J1 of Main CPU Control PCB
CHANNEL-SUBCHANNEL:
0-1. ANACH1, Non-isolated Analog Input 1
0-2. ANACH2, Non-isolated Analog Input 2
0-3. ANACH3, Non-isolated Analog Input 3
0-4. ANACH4, Non-isolated Analog Input 4
0-5. CUR. FOL. IN, 4-20 mA Input
0-6. DIFF IN, Differential Analog Input
1-0. ANOUT1, Non-isolated Analog Output 1
1-1. ANOUT2, Non-isolated Analog Output 2
2-0. LIN0, Non-isolated Logic Input 0
2-1. LIN1, Non-isolated Logic Input 1
2-2. LIN2, Non-isolated Logic Input 2
2-3. LIN3, Non-isolated Logic Input 3
2-4. LIN4, Non-isolated Logic Input 4
2-5. LIN5, Non-isolated Logic Input 5
2-6. LIN6, Non-isolated Logic Input 6
2-7. LIN7, Non-isolated Logic Input 7
3-0. K4, Logic Output Relay Coil For K4
3-1. K3, Logic Output Relay Coil For K3
3-2. K2, Logic Output Relay Coil For K2
3-3. K1, Logic Output Relay Coil For K1
3-4. LOGIC OUT 4, Non-isolated Logic Output 4
3-5. LOGIC OUT 3, Non-isolated Logic Output 3
3-6. LOGIC OUT 2, Non-isolated Logic Output 2
3-7. LOGIC OUT 1, Non-isolated Logic Output 1
4-0. B0, Thumbwheel Switch Bank 0
4-1. B1, Thumbwheel Switch Bank 1
4-2. B2, Thumbwheel Switch Bank 2
4-3. B3, Thumbwheel Switch Bank 3
4-4. B4, Thumbwheel Switch Bank 4
4-5. B5, Thumbwheel Switch Bank 5
4-6. B6, Thumbwheel Switch Bank 6
4-7. B7, Thumbwheel Switch Bank 7
4-8. B8, Thumbwheel Switch Bank 8
5. DIGITAL TACH, Digital Tachometer Input
I/O 784-10