Yaskawa I/O Driver for Intellution's Fix for use with MicroTrac DSD LAN - Manual

FUNCTION
MagneTek's I/O Driver for Intellution's FIX
program is designed to work in an IBM
compatible personal computer (PC) that has
a Contemporary Control Systems, Inc.
(CCSI) ARCNET card plugged into the PC's
bus. The Driver software accepts messages
coming into the ARCNET card from
MagneTek's MicroTrac DSD ARCNET LAN
(Local Area Network) and converts them into
a format acceptable to the FIX program.
HARDWARE
A. For your system computer (PC), you
must have the equivalent of an IBM PC/AT
(i.e. a machine with an 80286 processor) or
better. Also, your machine must have a
math co-processor such as an 80287 for the
80286 processor.
B. Set the jumpers and switches on the
CCSI ARCNET card (type PCX-CXB) as
shown in Figure 1.
RD MAG-FIX
EFFECTIVE 07/17/90
+—————————————————-———————-—-——+
| SW1 |
| +——|
| [—] | | ——> SW1
| [—] | | ———————--
| [ ] [ ] | | | ↑ ↑ ↓ ↑ ↓ ↓ ↑ ↓ |
| [ ] [ ] | | ———————--
| [ ] [—] | | 1 2 3 4 5 6 7 8
| E3 [—] | |
| [—] +——|
| IRQ2 [ ] |
| [ ] E1 | | |
| [ ] | | |-—+
| [ ] | | |-—+
| [—] | | |
| [ ] |
| IRQ7 E4 |
+——+ +———-——————+
| |
+———————————-————+
Figure 1. CCSI ARCNET Card Jumper Settings
1
REMOTE DEVICE
USER REFERENCE SHEET
FOR
MAGNETEK'S MAG I/O DRIVER
FOR INTELLUTION'S FIX
For use with MicroTrac DSD LAN