JBL Synthesis K2 S9900 User Manual
Page 22
22
IV. Once out of the carton, remove the upper and middle pads. Accessories are
packed on the top side of the upper end pad, so be careful not to discard them.
V. Carefully remove the cloth bag covering the enclosure.
VI. Lift the enclosure out of the bottom pad. It helps to remove the grille and use
the port opening and top edge of the baffle recess as holding points. DO NOT
LIFT THE SYSTEM BY THE HORN LIP.
IV.
V.
VI.
Products are shipped with round-tipped spikes on the bottom of the cabinet. If
you would like to use pinpoint spikes, remove round-tipped spikes and replace
them with pinpoint spikes. In case they are difficult to loosen, please use an
11/16-inch (18mm) wrench.
Four metal coasters are also provided. These are to be placed between the foot
and the floor, should further protection of the floor coverings be required.