Laney IRT-STUDIO - Manual (Page 9)

Forged deep within the Black Country - the metal beating industrial heartland
of the UK - where the sound of metal guitar was born, comes the IRONHEART.
With molten metal flowing through its circuits, IRONHEART continues the
legacy passed on by previous Laney amps such as KLIPP and AOR, and hits you hard between the eyes like a power
hammer from hell.
As a member of the IRONHEART family, the IRT-Studio has the same ferocious DNA beneath its hard metal chassis,
emitting the familiar dark red glow that warns of the power ready to be unleashed.
The IRT-Studio has been designed to bring the versatility and power of the IRONHEART family into the studio,
capturing the essence of its bigger brothers, but in a 2U rack-mountable sturdy steel cabinet. Emulated speaker outputs
and a low power input socket allow you to push the 15W output stage to its limits at a more controllable volume level. A
USB2.0 socket enables connection to most
recording software and re-amping if
required. A dummy load is connected if a
loudspeaker is not present, allowing you to
record silently if required.
The IRT-Studio features the same familiar
Pre-Boost and pull-shift EQ as the bigger
IRT60 and IRT120 models, as well as the
flexible Dynamics and Tone controls that
operate on the output section.
Combine your IRT-Studio with an IRT412,
IRT212 or IRT112 speaker cabinet for the
ultimate tonal experience.