Laney L5-STUDIO - Manual (Page 8)

Rear Panel Controls
POWER INLET SOCKET: Connect to your power source. Make sure the specified voltage is correct for your
country!
POWER FUSE: This drawer contains the main safety fuse for the unit. USE ONLY THE CORRECT SIZE AND
RATING OF FUSE AS SPECIFIED ON THE PANEL. If a fuse blows or fails and a replacement of the same size and rating
is installed and it in-turn blows, the amplifier has suffered a malfunction internally and needs immediate service from a
qualified technician. DO NOT TRY USING A FUSE OF HIGHER RATING. This may cause serious, irreparable damage to
the amplifier and presents a serious fire hazard. The mains fuse ratings are detailed in the specification section at the
rear of this manual.
POWER: Main power switch for unit.
SERIAL NO: Displays the model and serial number of the unit.
HT FUSE: This fuse protects the DC power to the tubes within the amplifier. USE ONLY THE CORRECT SIZE AND
RATING FUSE AS SPECIFIED ON THE PANEL. If the HT fuse blows or fails, and a replacement of the same size and
rating is installed and it in turn blows, the amplifier has suffered a malfunction. Firstly check the output tubes and replace
faulty ones if required. If the tubes aren’t the cause of the problem, the amplifier should be checked out by a qualified
technician. DO NOT TRY USING A FUSE OF HIGHER RATING. Again, this may cause serious, irreparable damage to
the amplifier. Fuses are designed to protect, do not take chances.
8
8
L Z B 1 2 3 4