Laney VC15-110 - Manual (Page 12)

1
2
3
REAR PANEL CONTROLS
1 2 3
POWER INLET SOCKET. Connect to your power source. Make sure the specified voltage is correct for your
country!
POWER FUSE: This drawer contains the main safety fuse for the unit. The fuse protects the AC power to the amplifier.
USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL. If a fuse blows or fails and a
replacement of the same size and rating is installed and it in turn blows, the amplifier has suffered a malfunction internally
and needs immediate service from a qualified technician. DO NOT TRY USING A FUSE OF HIGHER RATING. Using a
fuse that is too large in current rating may cause serious, irreparable damage to the amplifier and presents a serious fire
hazard. The mains fuse ratings are detailed in the specs section on page 7 of this manual
HT FUSE: This fuse protects the DC power to the tubes within the amplifier. USE ONLY THE CORRECT SIZE AND
RATING FUSE AS SPECIFIED ON THE PANEL. If a fuse blows or fails and a replacement of the same size and rating is
installed and it in turn blows, the amplifier has suffered a malfunction, at this point check the output tubes and replace faulty
ones if required. Should tubes not be the problem the amplifier should be checked out by a qualified technician. Do not
try using a fuse of greater value. Using a fuse that is too large in current rating may cause serious, irreparable damage to
the amplifier. Fuses are designed to protect, do not take chances.
Spare power fuse
included in the tray.
6 7 4 5 8 9
L Z B 1 2 3 4
SUPPLY VOLTAGE
& FUSE RATING
T500mA L 250V
T500mA L 250V ~100V
~120V
T250mA L 250V ~220V/~230V