Laney VC15-110 - Manual (Page 7)

SPECIFICATIONS
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal
household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
Supply Voltage ~100V, ~120V, ~220V, ~ 50/60Hz Factory Option
Mains Fuse (~220V, ~230V, ~240V = T250mA L 250V) (~100>120V = T500mA L 250V)
HT Fuse T100mA L 250V
Power Consumption 50W
Output Power Rating 15W
Loudspeaker 10” HH 1050 8 Ohm
Loudspeaker outputs Extension speaker socket (Disconnects Internal speaker)
(Minimum 8 Ohm Impedance)
Features Pure Class A/B Valve tone
2xEL84 Power Tubes
(Matched Set)
3x12AX7 Preamp tubes
Hi & Lo Gain Inputs
Rugged construction
FX Loop with switchable Level & Bypass
Footswitchable Yes, Channel and Reverb (FS2 Optional)
Reverb Yes
EQ Passive Bass, Middle and Treble
Tone (Active on top end of signal)
Bright Switch
Input Impedance
1MOhm
Size 351*450*203 (H*W*D)
Unit Weight 14.0 Kg (Shipping Weight 15.0 Kg)
230V,
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)