Laney CX12-A - Manual (Page 4)

After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging
into the power supply ensure you are connecting to a grounded earth outlet.
If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country
where the amplifier is to be used is strictly conformed to. As an example in the United Kingdom the cable colour code for
connections are as follows.
EARTH OR GROUND - GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN
Congratulations on your decision to purchase a Laney PA system . This range of cabinets bring you the power and
flexibility to create anything from a simple one box PA system to a flexible multibox set up.
The CX-A range consists of the following products
CX15-A 300W active loudspeaker with built in CD/Line/ Mic inputs, optical limiter switchable .
CX12-A 165W a , and crossover filter.
CXSub-A 300W active bass cabinet with built in crossover filter and optical limiter.
CXSub Dedicated passive bass cabinet ideal for use as an extension speaker with the above products.
and crossover filter
ctive loudspeaker with built in CD/Line/ Mic inputs optical limiter switchable
Laney products are designed with ease of operation as a primary objective, however to ensure you derive the best from
your new PA, it is important you take time to read this user manual and to familiarise yourself with the control functions
and facilities available.
When you first receive your Laney CX / CX-A cabinet, follow these simple procedures:
(i) Ensure that the amplifier is the correct voltage for the country it is to be used in.
(ii) Make all connections with a high quality shielded cable. You have probably spent considerable money on your PA system
- don’t use cheap cable, it won’t do your gear justice .
This manual has been written for easy access of information. The rear panels of each unit are graphically illustrated, with
each control and feature numbered. For a description of the function of each control feature, simply check the number
with the explanations adjacent to each panel.
Later in the manual are some connection diagrams for a number of different set ups to show how to get the best from
your PA system.
Best Wishes
All at Laney
INTRODUCTION
BEFORE SWITCHING ON
Laney
4
www.laney.co.uk
On unpacking your CX/CX-A product please check carefully for any signs of damage that may have occurred whilst in
transit from the Laney factory to your dealer. In the unlikely event that there has been damage please repack your unit
in its original carton and consult your dealer.
We would strongly advise you to store away your original transit carton since in the unlikely event that some time in
the future your unit should develop a fault, you will be able to return it to your dealer for rectification securely packed.
UNPACKING