Laney IRT-X - Manual (Page 10)

SET UP OPTIONS
IRT-X
IRT-X
AS A
PERSONAL
WEDGE MONITOR
Connection Options
1. Remove the internal speaker jack from the rear panel of your amplifier, connect a
lead from the IRT-X Input Socket to the internal speaker socket on your amplifier.
Connect a lead from the Load Socket on the IRT-X to your internal speaker lead.
OR
2. If your amp has 2 speaker out sockets then there is no need to remove the on-
board speaker– simply connect the IRT-X to the second speaker output and there is
no need to adjust the amps impedance setting.
9