Lanner FW-8892 - Manual (Page 37)

FW-8892
37
Super IO Configuration:
Press <Enter> to enter the sub-menu and the following screen appears:
Serial Port1/2 Address:
These items specify the base I/O port addresses of the onboard Serial Port 1.
Selecting [Auto] allows BIOS to automatically determine the correct base I/O port
address.
Settings: [3F8/IRQ4], [2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].
Parallel Port Address:
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC].
Parallel Port Mode:
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP].
Parallel Port IRQ:
Configuration options: [IRQ5] [IRQ7].