Bang & Olufsen BeoVision 10 Getting Started - Manual (Page 25)

In
st
al
la
tio
n a
nd
s
et
ting
up
Power saving Master Link must not be connected if POWER SAVING is set to ON in the STANDBY SETTINGS menu. If
POWER SAVING is set to ON and the TV is in standby, the sockets AV4 and MASTERLINK are deactivated.
This means that you cannot access the TV from your link room audio or video system, while the main
room TV is in standby. Furthermore, it is not possible to make recordings on sources connected to AV4.
See the Guide for further information.
DVB-T/C* 1
Aerial input socket for external aerial/cable TV
network.
AERIAL OUT
Not for use.
DVB-S* 1
Aerial input socket for digital satellite signal.
SMARTCARD
For a card/module for access to encrypted digital
channels.
Ethernet
For service use only.
USB
For service use only.
25