Cleaning, Run cables, Smart card and ca module – Bang & Olufsen BeoVision 8-40 Getting Started User Manual
Page 19
In
st
al
la
tio
n
an
d
se
tt
in
g
up
Cleaning
For safety reasons the mains supply cable must be
fastened to the cable strip (A). All cables must be
fastened to the cable strip (B). However, if your
setup includes a VGA connection, do not run the
VGA cable through the cable strip (B). Instead, use
the two screws in the VGA plug to fasten it to the
socket.
If you are going to connect any other equipment
to the TV, do not connect it to the mains yet!
Run cables
Maintenance
Screen and cabinet
Never alcohol
Regular maintenance, such as cleaning, is the responsibility of the user.
Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and
water without leaving streaks or traces. Some micro-fibre cloths may harm the optical coating due to
their strong abrasive effect.
Never use alcohol or other solvents to clean any parts of the TV.
Remove the cover to access the CA module. To
remove the cover, use your finger or place a plastic
card in the second groove from the right and you
can easily flip off the cover.
The CA module is a ‘card reader’ for your Smart
Card which decodes the coded signals sent out
by the programme provider. See the Guide for
further information.
Smart Card and CA module
A
B
B
A
C
K
SI
D
E
5
V
0.
5
A
C
H
IP
SI
D
E
C
A
SM
A
R
TC
A
R
D
19