Bang & Olufsen BeoVision 8-40 Getting Started - Manual (Page 20)

Connection panels
Any equipment you connect to the main connection panel must be registered in
the CONNECTIONS menu.
Useful hints
~ – Mains supply
Connection to the mains supply.
HDMI IN (A–B, and C on some models)
For High Definition Multimedia Interface video
source or PC. The sources can be registered to any
of the AV socket groups. To expand the number
of HDMI sockets, connect an HDMI Expander to
the HDMI C socket, when available, otherwise to
the HDMI B socket.
SPDIF (1–2)
Digital audio input socket, e.g. DVD player. You
can use the socket in conjunction with an AV
socket.
PUC (1–4)
For IR control signals to external equipment
connected to an AV socket.
AV (1–2)
21-pin sockets for connection of additional video
equipment, such as a DVD player, set-top box, a
decoder or video recorder.
VGA (AV3)
For connection of a PC to receive analogue
graphics.
AV3 (video, L, R)
For audio connection (right and left sound
channel respectively) and video signals from an
external source.
Y – Pb – Pr (AV2–4, 6)
For video signals from an external source, e.g.
HDTV source. You can use the socket in
conjunction with an AV socket or a digital audio
socket.
AERIAL
Aerial input socket for an analogue TV signal.
Mains cord and plug The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains
cord is damaged, you must buy a new one from your Bang & Olufsen retailer. Connect the ~ socket on the main
connection panel of your TV to the wall outlet. The IR-receiver lights up in red and the TV is in standby mode and
ready to be used.
5V 50 mA DVB-T/C
DVB-S 14/18V
400 mA
20
System Module sockets (optional) DVB Module sockets (optional)
Surround Sound Module sockets
Standard sockets