Emerson Radio ES88 - Manual (Page 6)

5
FLAT PANEL SPEAKER CONNECTION
IMPORTANT: CONNECT THE SPEAKER PANEL TO THE MAIN UNIT
BEFORE YOU CONNECT THE AC POWER CORD TO THE AC OUTLET.
The Thinovation™ Speaker Panel not only contains the left and right wide range
speakers, it also serves as the CD compartment cover. To install the Thinovation™
Speaker Panel on the main unit simply slide the Thinovation™ Speaker Panel
down ward on the speaker mounting bracket as shown so that the two plugs on
the top of the mounting bracket fit into the two jacks on the bottom of the speaker
panel. You may tilt the mounting bracket forward to make this operation easier if
necessary.
After the panel is mounted on the bracket you should lock the panel in place by
sliding the two locking switches on the back of the panel ‘inward’ so they fit into the
corresponding ‘notches’ on the sides of the mounting bracket.
IMPORTANT: Remember to unlock these two switches before you try to remove
the speaker panel from the mounting bracket.
LOCK RELEASE LOCK RELEASE
ES88_ib072503.p65 25/7/2003, 10:09 5