Installing the remote control batteries – Emerson Radio ES88 User Manual

Page 9

Advertising
background image

8

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery

compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent

damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

(Follow battery manufacturer’s directions.)

INSTALLING THE REMOTE CONTROL BATTERIES

1.) Slide the door in the direction of the arrow.

2.) Insert two “AAA” batteries in the compartment. Follow the polarity markings

engraved inside the compartment. If the batteries are inserted incorrectly the

remote control will not work.

3.) Replace the battery door.

Notes: Use a well-known brand of alkaline batteries for longest life and best

performance. When the remote operation becomes intermittent replace both

batteries at the same time. Do not mix different types of batteries, such as

alkaline and carbon zinc batteries.

ES88_ib072503.p65

25/7/2003, 10:09

8

Advertising