Emerson Radio ES88 - Manual (Page 7)

6
POWER SOURCE
This system is designed to operate on 120V AC 60Hz house current only.
Connecting this system to any other power source may cause damage to the
system and such damage is not covered by your warranty.
Unwind the AC power cord and extend it to its full length. Connect the small female
type plug on one end of the cord to the AC jack on the back panel. The plug can
only be inserted in the jack one way. If the plug does not seem to fit into the jack
correctly, turn the plug over and try again. The plug must be fully inserted into the
jack or the system will not operate.
NOTE: The system has polarized AC plug with one wide blade and one narrow
blade. The plug will only fit into matching polarized AC outlets. This is a safety
feature to reduce the possibility of electric shock. If the plug will not fit in your AC
outlets, you probably have outdated non-polarized outlet. You should have your
outdated outlet changed by a qualified, licensed electrician. Do not file the wide
blade on the plug, or use an adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.
AC Plug
AC Outlet
ES88_ib072503.p65 25/7/2003, 10:09 6