Linx Technologies MDEV-LICAL-MT - Manual (Page 8)

– – – – 10 11
MT Series Master Development System Software
The MT Series Master Development System software can be used in one
of two modes. The default mode provides basic control of the transcoder
through the serial interface engine.
The second mode is for full development of software designed to control
the transcoder through the SIE. It shows all of the commands, the packets
sent to the transcoder and the responses from the transcoder as well as
a full view of the transcoder’s memory bank. This allows full access and
control of the transcoder, aiding in product development.
Both modes interface to the development boards through the USB module,
demonstrating the simplicity of the hardware / software interface. Clicking a
button on one computer causes the development board to activate,
sending a command to the other development board. The other board then
outputs the command to another computer where an action takes place,
demonstrating the power and simplicity of the MT Series system. Note that
the USB Interface Jumpers must be installed in order for the software to
communicate with the transcoder.
Under the View Documentation label at the top of the screen are links
to the MT Series documents, including the full documentation for the
software. Please see this document for details on operation of the software.
Figure 9: The MT Series Master Development System Software
Resources
Support
For technical support, product documentation, application notes, regulatory
guidelines and software updates, visit www.linxtechnologies.com
RF Design Services
For customers who need help implementing Linx modules, Linx offers
design services including board layout assistance, programming,
certification advice and packaging design. For more complex RF solutions,
Apex Wireless, a division of Linx Technologies, creates optimized designs
with RF components and firmware selected for the customer’s application.
Call +1 800 736 6677 (+1 541 471 6256 if outside the United States) for
more information.
Antenna Factor Antennas
Linx’s Antenna Factor division has the
industry’s broadest selection of antennas
for a wide variety of applications.
For customers with specialized needs,
custom antennas and design services are available along with simulations
of antenna performance to speed development. Learn more at
www.linxtechnologies.com.
by