Edimax Technology ES-3124REM - Manual (Page 57)

57
2.3.2 Create a VLAN Group
Create Port-based VLAN and add member/nonmember
ports to it
1.Select <Edit>.
2.VLAN Name: Type a name for the new VLAN.
3.Grp ID: Type the VLAN group ID. The group ID range is
1~26.
4.Member: Press Space key to choose VLAN member.
There are two types to select:
a. Member: the port is a member port.
b. NO: the port is NOT a member port.
5.Press Ctrl+A go back action menu line.
6.Select <Save> to save all configure value.
NOTE: If the trunk group exists, you can see it (ex: TRK1,
TRK2…) after port26, and you can configure it is the member
of the VLAN or not.