Edimax Technology ES-3124REM - Manual (Page 84)

84
3.5.2 State Activity
1.Select <Edit>.
2.Press Space key to choose the item.
Active: The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol
packets, and responds only if it receives LACP
protocol packets from the opposite device.
3.Press Ctrl+A go back action menu line.
4.Select <Save> to save configure value.
If user set LACP mode in the trunk group, all of the
member ports of this trunk group will set "Active" automatic.