Edimax Technology ES-3124REM - Manual (Page 83)

83
3.5.1 Working Port Setting
This page can set the actually work ports in trunk group.
1.Select <Edit>.
2.Group: Display the trunk group ID.
3.LACP: Display the trunk group’s LACP status.
4.LACP Work Port Num: The max number of ports can be
aggregated at the same time. If LACP static trunking group, the
exceed ports is standby and able to aggregate if work ports fail.
NOTE: Before set this page, you have to set trunk group on the
page of Trunk Configuration first.