Magnum Energy AGS Network (ME-AGS-N) - Manual (Page 33)

27 © 2012 Magnum Energy, Inc.
7.0 Using a Remote with the ME-AGS-N
7.2 Software Differences Between AGS Revisions
This AGS manual covers a ME-AGS-N revision of ≥5.0. There may be differ-
ences between revisions that affect your AGS setup/operation, use Table 7-2
below to be aware of the differences between AGS revisions.
Info: Refer to your specifi c remote control section in this manual for
information on determining your AGS revision.
Table 7-2, AGS Revision Differences
ME-AGS-N Revision
Revision Changes 5.0 5.1 5.2
Use 2-Wire Standby
mode (Gen Type setting)
NA NA YES
Max Gen Run Time set-
ting can be disabled
NO NO YES
Gen Run Time is avail-
able for display on
remote
ME-ARC &
ME-RTR only
ME-ARC &
ME-RTR only
ME-RC, ME-ARC
& ME-RTR
Can I upgrade the software on my ME-AGS-N? Yes, and it’s pretty sim-
ple and not very expensive. For $50 USD plus shipping, you can send your
ME-AGS-N to Magnum Energy and have it upgraded to the latest revision. If
this is something you want to do, contact Magnum Energy to provide us with
your contact and credit card information (VISA or MasterCard only) and we
will provide you with an RMA (Return Material Authorization) number. Once
you have this RMA number, you can send the ME-AGS-N to us and we will
upgrade it to the latest revision available and ship it back to you.
Note: The ME-AGS-N is not the same device as the ME-AGS or ME-AGS-S.
If you have one of these devices, you can contact Magnum Energy to deter-
mine if you have any upgrade options.