Magnum Energy MS-G Series User Manual
Ms-g series, Owner’s manual
Advertising
Table of contents
Document Outline
- 1.0 Introduction
- 2.0 Installation
- 2.1 Pre-Installation
- 2.2 Mounting the Inverter
- 2.3 Wiring the Inverter – General Requirements
- 2.4 DC Wiring
- 2.5 AC Wiring
- 2.5.1 Pre-AC Wiring Requirements
- 2.5.2 AC Wire Size and Overcurrent Protection
- 2.5.3 Recommended GFCI (Ground Fault Circuit Interruption) Outlets
- 2.5.4 AC Terminal Block Connections
- 2.5.5 AC Conductor Wiring (MS2012-G, MS2812-G, MS4024-G models)
- 2.5.6 AC Wiring Configurations (MS2012-G, MS2812-G, MS4024-G)
- 2.5.7 AC Conductor Wiring (MS2000-G models)
- 2.5.8 AC Wiring Configuration (MS2000-G models)
- 2.6 Grounding Inverters
- 2.7 Inverter Notification Requirements
- 2.8 Final Inspection
- 2.9 Functional Test
- 3.0 Operation
- 4.0 Maintenance and Troubleshooting
- Appendix A – Specifications and Optional Equipment
- Appendix B – Battery Information
- Appendix C – Power Consumption & Output Waveforms
- Appendix D – Inverter/Charger Terminology
- Appendix E – Warranty & Service