Epson POWERLITE 5010E - Manual (Page 46)

46
Making Detailed Adjustments
Selecting Memory Settings and Resetting the
Projector
Your projector comes with 10 memory locations where you can save customized settings to
obtain the best picture quality for each of your video inputs.
Creating Memory Settings
Memory settings can be used to store most of the picture quality settings on page 38 and color
settings on page 39. Before saving them to memory, adjust the settings to the desired levels.
1. Press the Memory button on the remote control.
2. Select Save Memory .
3. Select the memory name you want to use, then press the Enter button to save your
settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you select
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Selecting Memory Settings
You can easily recall the memory settings by using the
Memory button on the remote control.
1. Press the Memory button on the remote control.
2. Select Load Memory .
3. Use the arrow buttons to select the desired setting,
then press the Enter button.
After a moment, the image appears on the screen
using the retrieved settings. Certain settings may not be applied, depending on the input
signal.