Epson Expression 1680 - Manual (Page 146)

Installing the TCP/IP Protocol
139
When you have your IP address, follow the steps below to assign it to your computer.
1. Select TCP/IP on the list of installed
network components on the
Configuration tab, and then click the
Properties button. If necessary, click
the IP Address tab.
2. Click Specify an IP address , and
then enter the IP address and subnet
mask.
If you’re using a DHCP server on your network, you can assign an IP
address automatically by selecting Obtain an IP address automatically and
clicking OK.
3. Click OK to close the TCP/IP Properties window, then click OK again to close
the Network window and have your IP address assignment take effect. Make sure
you share the IP address for the scanner server with client computers.
1680.book Page 139 Thursday, March 1, 2001 4:28 PM