Epson Expression 1680 - Manual (Page 78)

Network Scanning
71
Installing the Scanner Server Software on
Windows 2000
Before you begin, make sure the Expression 1680 is connected to your computer.
Also, make sure you’ve recalibrated your monitor to factory specifications.
Depending on how your computer system was originally set up, you may be asked to
insert your Windows 2000 CD-ROM during driver installation. Make sure you have
it available, or know where to find the Windows source files on your hard disk (for
example, in the Windows folder). If you need help, contact your computer
manufacturer.
If you’ve just installed a SCSI or IEEE 1394 interface card, you may be
asked to install a driver at the beginning of installation. Follow the
instructions on the screen to install the best driver, then continue with the
scanner server installation.
1. Turn on your scanner first, then turn on your computer.
2. When you see the window on the
right, insert the EPSON Expression
1680 Scanning Tools CD-ROM in
your drive and click
Next .
3. Select Search for a suitable driver
for my device , and then click Next .
1680.book Page 71 Thursday, March 1, 2001 4:28 PM