Auriol H14371 - Manual (Page 12)

12 GB/IE
Alarm functions
The light alarm clock features an acoustic and a visual alarm.
The visual alarm is a white light appearing in the light field
1 . The
brightness is adjustable. You may further set a lead time.
The lead time is the time from the alarm time setting during which the
brightness of the light field will gradually increase from zero to the set
value (sunrise simulation).
Choose from eight different soundscapes, an electronic alarm sound or
radio reception as the acoustic alarm. The volume of the acoustic signal
can be selected. The signal starts at the set alarm time at a low volume
and adjusts to the set value within a few minutes.
The alarm features an alternate simple alarm function and snooze function.
When selecting the simple alarm function, shut off the alarm with a
simple button of a button.
When selecting the snooze function the signal will turn off and sound
again 10 minutes later. This process can be repeated any number of
times until the alarm finally shuts off.
Setting the alarm
Press and hold the ALARM button 9 for 3 seconds in clock mode
to access the alarm settings.
Press the + button 12 or the — button 13 to change the respective
flashing value.
TIP: Holding the + or — button will fast scan forward or backward