Auriol H14371 - Manual (Page 16)

16 GB/IE
Rapid Test
Note: The light alarm clock must be in clock mode for the rapid test.
Press the TEST button 11 . The alarm will cycle through the settings
of the selected alarm. The advance alarm will not be run. Instead,
the light will be adjusted to the set value, then the alarm will sound.
Illumination
Press the SNOOZE button 6 in clock mode. A white guide light
will appear in the light field 1 .
Press the SNOOZE button again to switch off the light.
The visual alarm will also work when the light is on. The light will then
be deactivated and will reappear after the alarm.
Mood light function
The mood light function will activate a weak, coloured light in the light
field
1 .
Repeatedly press the LIGHT+ button 8 to activate the mood light
and to increase the following colour scale, or decrease mood light
and switch off by pressing the LIGHT– button
7 :
Mood light starts from: → Red → Green → Blue → Yellow → Pink →
Sky blue → Purple → Automatic colour change
Activating the mood light does not impact the functionality of the visual
alarm. The mood light will then be deactivated and reactivated after the
alarm.