DJI Mavic Pro - Manual (Page 36)

Remote Controller
Mavic Pro User Manual
36 © 2016 DJI All Rights Reserved.
Linking the Remote Controller
The remote controller is linked to your aircraft before delivery. Linking is only required when using a new
remote controller for the first time. Follow these steps to link a new remote controller:
1. Turn on the remote controller and connect to the mobile device, and turn on the aircraft. Launch the
DJI GO 4 app.
2. Enter “Camera” and tap on and then tap “Linking RC” button.
Toggle the Control Mode switch to RC mode before linking.
The remote controller will un-link itself from an aircraft if a new remote controller is linked to the
same aircraft.
3. The remote controller is ready to link.
4. Locate the linking button on the side of the aircraft, as shown in the figure below. Press the link button
to start linking. The Linking Status Indicator will display a solid green once the remote controller is
successfully linked to the aircraft, and the LCD screen on the remote controller will display the aircraft’s
information.
Link Button
Linking Status Indicator