Extron electronic MVX 88 Series - Manual (Page 28)

Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 3-10
PRELIMINAR
Y
The current configuration (figure 3-12) is now:
• Input 5 video tied to output 1, output 3, output 4, and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3, 4, and 8.
Input
Output
1
3
4
8
5
Video
Audio
Figure 3-12 — Example 2 configuration
Example 3: Remove a tie from a set of ties
In the following example, an existing tie is removed from the current configuration.
The example shows the front panel indications that result from your actions.
N This example assumes that you have performed example 1 and example 2.
1 . Select audio only for the tie (figure 3-13).
I/O
AUD
VID
Press the button to cycle
through the selections.
The video LED is off when video is deselected.
The audio LED lights when audio is selected.
Figure 3-13 — Select audio only
2 . Press and release the Input 5 button (figure 3-14).
2 6 5 4
INPUTS OUTPUTS
1 8 6 5 4 3 7
Press and release the Input 5 button.
The Input 5 LED lights to
indicate that input 5 is selected. The Output 3, Output 4, and Output 8 LEDs light to indicate the ties created in
example 1.
Figure 3-14 — Select an input