Everpure 2001 - Manual (Page 13)

SUPREMA 2001 - OPERATION & SERVICE MANUAL
Suprema 2001 - Operation & Service July 6, 2001 Page 13 of 60
PROGRAMMING THE EQUIPMENT
The first section of the "
SET - UP
" mode displays all the counters. These counters can be
reset while in this mode. The following table lists all the counters in the order in which
they appear at the beginning of the "
SET - UP
" mode;
CASHBOX TOTAL
VEND TOTAL
(RESETTABLE) VEND TOTAL RESET
COIN DISPENSE --- appears only in "C OIN " mode
TOTAL / SELECTION
FREE VEND TOTAL
VIEWING AND RESETTING COUNTERS
1. Enter the " SET - UP " mode.
a) Press the "
SET - UP " mode button on the interior door panel. The display
will now read,
b) To reset the "
CASHBOX TOTAL
", press the "
START " button. To scroll to
the next counter, press the "
UP
" button on the hidden menu scroll buttons.
c) The next counter is the "
VEND TOTAL
" counter. This counter can only be
viewed and it is not possible to reset it at this point. To scroll to the next
counter, press the "
UP
" button on the hidden menu scroll buttons.
d) The next counter to be displayed is the "
VEND TOTAL RESET
" counter
(resettable). Press the “
START
” button to reset, if needed.
e) The next counter to be displayed is the "
TOTAL / SELECTION
" counter.
Press the “
START
” button to reset the counters.
Please note that a confirmation message will appear after “
START
” is
pressed. To reset the counters, press “
START
” again. To cancel the reset,
press the “
COFFEE
” button.
f) The next counter to be displayed is the "
FREE VEND TOTAL
" counter.
Press the “
START
” button to reset, if needed.
CASH BOX
TOTAL= $XXXX.XX
! Note:
While in the “ SET -
UP ” mode,
pressing the “ SET -
UP ” button once
again will exit this
mode and save all
changes made to
the programming.
! Note:
The “ VEND TOTAL ”
counter can only
be reset by
performing a
“
TOTAL COUNTER
RESET ”. Page 15.
$ Tip:
The “ VEND TOTAL ”
counter can also be
viewed by pressing
the “
COFFEE ”,
“ 50/50” and “ DECAF ”
buttons
simultaneously. It
will appear
immediately after
the product status
is displayed.