Setting water, Pricing, Setting prices – Everpure 2001 User Manual

Page 18: Set water, Set price, Suprema 2001 - operation & service manual

Advertising
background image

SUPREMA 2001 - OPERATION & SERVICE MANUAL

Page 18 of 60

July 6, 2001

Suprema 2001 - Operation & Service

SETTING WATER

1. To adjust water settings, press the "

UP

" button on the hidden menu scroll

buttons and scroll until the following message appears,

a) Press the "

START

" button to enter the set mode.

b) At this point, you can now select the water settings for any cup size and

product by pressing the appropriate buttons on the selection panel. The
time setting displayed will correspond to the cup size and product LED's
that are illuminated.

c) Using the hidden setting adjustment buttons, increase or decrease the

timing for the water.

d) To exit the "

SET WATER

" mode and proceed to the next setting, press the

"

UP

" or "

DOWN

" scroll buttons.

WARNING:

Do not press the “

START

” button to exit this mode as it will do a test

cycle and dispense water. This does not apply to “

CAFE MOCHA

”, as there

is no test cycle for this product.



SETTING PRICES

To operate this equipment in “

COIN

” mode, an optional Coinco 9300 series coin

changer must be installed. This changer can be purchased from your local Coinco
retailer. Installation instructions for the coin changer and pricing decals can be found
on page 58 of this manual.

1. To adjust price settings, press the "

UP

" button on the hidden menu scroll

buttons and scroll until the following message appears,


a) Press the "

START

" button to enter the set mode.

b) At this point, you can now select the price setting for any cup size and

product by pressing the appropriate buttons on the selection panel. The
price setting displayed will correspond to the LED's that are illuminated.

c) Using the hidden setting adjustment buttons, increase or decrease the

price.

d) To exit the "

SET PRICE

" mode and proceed to the next setting, press the

"

UP

" or "

DOWN

" scroll buttons.

SET WATER

PRESS <START>

SET PRICE

PRESS <START>

!

Note:

The minimum
allowable setting
for water is 0.5
seconds, and the
maximum is 8.0
seconds for coffee
water and 20.0
seconds for "

HOT

WATER

".

!

Note:

When adjusting
the water level for
the “

CAFE MOCHA

”,

only the chocolate
valve timing is
adjusted. The
coffee valve
timing remains
unchanged as it is
calculated by the
microprocessor.

!

Note:

The maximum
allowable price
setting is $12.75.
This is the
maximum setting
per cup, as well as
for a complete
carafe.

Advertising