Casio 130CR - Manual (Page 12)

12
E
6. For the Euro only
6-1. Press the following keys to define the main currency/print out currency of the subtotal.
6-2. Press the following keys to set the currency exchange rate against the Euro.
P3 appears in mode display
Setting the Euro
P3 appears in mode display
C o
XVXX o
Z p
o
Euro Status
(to end the setting)
(to end the setting)
Procedure Purpose
Euro status
(1) Main currency = Local, Print out subtotal = Local: ?
(2) Main currency = Euro, Print out subtotal = Euro :
Z
(3) Main currency = Local, Print out subtotal = Both: X
(4) Main currency = Euro, Print out subtotal = Both :
C
C o
Z>>> o
Z>MMC p
o
Decimal position Exchange rate
(up to 6 digits)
Example: (Exchange rate and decimal position)
Currency exchange rate = 1 Euro in local currency
1 Euro = 1.95583 DM :
Z>BB<CB
Setting the
Australian GST
Procedure Purpose
For Australia only.
You can set some programmable options to suit the Australian GST by the following procedure.
1. Turn the mode switch to Z position.
2. Press the following keys to program.
?Z?ZX??Z op
If you want to cancel this operation, press
o
instead of
p
.
Procedure Purpose
For the Euro only.
You can restrict the registable currency to the Euro only by the following procedure.
1. Turn the mode switch to Z position.
2. Issue all reset report including periodic data.
3. Press the following keys to set.
?Z?MX??X op
If you want to cancel this operation, press
o
instead of
p
.
Restricting the
currency (Euro)
Part-1 QUICK START OPERATION