Casio PL-40R 5 - Manual (Page 15)

A-31
MIDI Data Format
J Mono Mode On
Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
vv........Number of Mono Mode Channels = 00H to 10H
Recognition
Receipt of a Mono Mode On message does not turn on the
instrument Mono Mode. Receipt of a Mono Mode On
message is treated as an All Sound Off message.
Send
This message cannot be sent.
J Poly Mode On
Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
Receive
Receipt of a Poly Mode On message by the instrument sets
Channel n to Mode 3 and is processed as if an All Sound Off
message and All Note Off message were received.
Send
This message cannot be sent.
J Active Sensing
Format
Receive
If no message is received within 400msec after the Active
Sensing message is received, the All Sound Off, All Note
Off, and Reset Controller procedures are performed.
Send
This message cannot be sent.
J Timing Clock
Format
Recognition
This message cannot be received.
Send
This message is sent during auto accompaniment and song
playback while the instrument’s “Real Time Message Out”
is turned on.
J Start
Format
Recognition
This message cannot be received.
Send
This message is sent when auto accompaniment and song
playback starts while the instrument’s “Real Time Message
Out” is turned on.
Byte 1 Byte 2 Byte 3
BnH 7EH vvH
Byte 1 Byte 2 Byte 3
BnH 7FH 00H
System Messages
System Real Time Message
Byte 1
FEH
Byte 1
F8H
Byte 1
FAH
426-E-123A
PL40NE01-1.book 31 ページ ２００２年７月２３日 火曜日 午後６時５２分