Casio HA-D62IO User Manual

Page 2

Advertising
background image

4. Before using the cradle ports, remove the

caps from the ports.
When using a LAN, connect one end of the
LAN cable to the LAN port and the other
end to the computer or hub.
When using a USB connection, connect one
end of the USB cable (DT-380USB) to the
USB port and the other end to the computer.

5. Align the contacts on the underside of the

IT-600 with the power supply contacts on
the Ethernet cradle and then set the IT-600
into the cradle so that mount holes in the
back of the IT-600 are aligned with the
mount hooks on the cradle.
Once the IT-600 is properly set in the cradle,
the power LED on the front of the Ethernet
cradle lights green.

Status of Indicator 1:

Orange: Charging
Red:

Standby due to battery pack error or outside charging temperature range
(charging begins when the temperature is within the charging temperature range)

Green:

Charging complete

Important!

Always remove the IT-600 from the Ethernet cradle before changing the LAN/

USB selector switch setting.

Never short out the power contacts of the Ethernet cradle. This can damage the

Ethernet cradle.

Do not subject the IT-600 or Ethernet cradle to vibration or impact while LAN

or USB communication is in progress.

When mounting the IT-600, securely attach to the mount hooks of the Ethernet

cradle and check that the power indicator LED on the front of the Ethernet
cradle lights green. Charging and communication will not proceed properly if
the IT-600 is not mounted properly.

The LAN and USB connections cannot be used concurrently.
Always cap ports that are not being used. Using the Ethernet cradle while the

ports are uncapped can cause damage.

Installing and Connecting the Ethernet Cradle Power Supply

Use the optional AC adaptor (AD-S42120A) to supply power to the Ethernet cradle.
Always connect the AC adaptor to the Ethernet cradle before transferring data between
the IT-600 and other devices.
Power to the IT-600 is supplied from the Ethernet cradle.

1. Plug the AC adaptor into the AC adaptor

jack on the back of the Ethernet cradle.

2. After connecting the AC adaptor to the

power cable, plug the plug of the power
cable into an electrical outlet.

3. Set the selector switch on the back of the

Ethernet cradle to the port that will be used.
Set the switch to LAN to use the LAN port
or to

to use the USB port.

DC IN 12V

Computer or hub

PC

Advertising