Casio XW-DJ1 - Manual (Page 11)

General Guide
EN-9
English
No. Item: Description:
16 USB port Connect with a computer’s USB port.* Connect to a USB2.0 or higher USB port.
17
iOS device connection
terminal (Mini Din) Connect the Mini Din plug of the included Lightning/Mini Din cable when using an
iOS device (iPad, iPhone, iPod touch).
18 SPEAKER ON/OFF switch Enable or disable output from the speaker on the bottom of TRACKFORMER.
19 MASTER OUT terminals Connect an RCA pin cable to an output device (amp, powered speakers, PA mixer, etc.)
20
HEADPHONE OUT terminal Connect headphones. (Stereo mini plug)
This terminal outputs the playback of the deck whose sound is cut by the DJ software
crossfader. (Initial default setting)
21
AC adaptor terminal Connect the supplied AC adaptor. Use of the AC adaptor is required when using
TRACKFORMER while charging an iOS device. See “Charging an iOS Device, Built-in
Speaker Operation” for more information.
22
Battery compartment Load six batteries (of the specified type) here to run TRACKFORMER under battery
power.
23
Speaker The MASTER sound is output from the built-in speaker when the SPEAKER ON/OFF
switch (18) is ON.
24
iPhone holder/Slot The included iPhone holder can be connected to TRACKFORMER by inserting it into
the slot.
16 17 18 19 20 21
22 23
24 24
XWDJ1-ES-1A.indd 11 2014/11/28 17:15:48