Casio SE-S10 Manual - Manual (Page 10)

10
E
Part-1 QUICK START OPERATION
3. Setting the Cash Register
! Plug the power cord of the cash register into AC outlet.
@ Please choose your language followed by printed message.
# When the display shows blinking "0", such as
Enter current date in Day, Month, Year.
$ When the display shows blinking "0", such as
Enter current time in Hour, Minute.
% Set the mode switch to REG.
^ Tear off any excess paper.
& Replace the printer cover slowly.
*Default printer defi nition is receipt printer.
00-00-00
00-00
4. If you want to use a printer as journal printer
! Set printing system as journal.
Z
Z
u
@ Remove the printer cover by lifting up the back.
# Press the l key until approximately 20cm of the
paper is fed from the register.
REG
OFF
RF
PGM
CAL X
Z
$ Roll the paper onto the take up real a few turns.
% Set the left plate of the take up need and place the
reel into the register.
^ Press the l key to take up any slack in the pa-
per.
& Replace the printer cover slowly.