Powerplus POW63777 LAWNMOWER 173CC 530MM EN - Manual (Page 10)

POW63777
EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
9.4
“4” convert to side-discharge mower
Make sure the motor stopped and blade has come to a complete standstill!!
 Lift the discharge flap and remove the grass collect box.
 Mount the mulching wedge (as described under To convert to mulching mower).
 Loosen the screw on the side wand flap and turn the flap to the side.
9.5 Return to normal mower
To Remove the mulching wedge:
Make sure the motor stopped and blade has come to a complete standstill!!
 Lift the rear discharge flap and remove the mulching wedge by unlocking it from the
housing and removing it.
To remove the side discharge channel:
Make sure the motor stopped and blade has come to a complete standstill!!
 Place the side flap back on the machine and fasten the screw.
9.6 Mowing tips
 Under certain conditions, such as very tall grass, it may be necessary to raise the height of
cut to reduce pushing effort and to keep from overloading the engine and leaving clumps
of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn
mower over the area a second time.
 For extremely heavy cutting, reduce the width of cut by over lapping previously cut path
and mow slowly.
 Pores in cloth grass catchers can become filled with dirt and dust with use and catchers
will collect less grass. To prevent this, regularly hose catcher off with water and let dry
before using.
 Keep top of engine around starter clear and clean of grass clippings and chaff. This will
help engine air flow and extend engine life.
10 MAINTENANCE
Important: regular, careful maintenance is essential for keeping the safety
level and original performance of the machine unchanged in time.
 Keep all nuts, bolts and screws tight to be sure the equipement is in safe working
condition. Regular maintenance is essential for safety and performance.
 Never store the equipment with fuel in the tank inside a building where vapour may reach
a flame or a spark or a source of extreme heat.
 Allow the engine to cool before storing in an enclosed space.
 To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and
fuel storage area free of grass, leaves, or excessive grease. Do not leave containers with
grass cuttings in rooms.
 For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to
be replaced and not repaired. Use genuine spare parts. Parts that are not of the same
quality can damage the equipment and be dangerous for your safety.