Powerplus POWX066 ANGLE GRINDER 2400W Ø230MM EN User Manual
Page 8
![background image](/files/832278/content/doc008.png)
POWX066
EN
Copyright © 2010 VARO
p a g e
|
8
8 OPERATING MODES
8.1
Rough grinding:
For the best rough grinding results, hold the grinding wheel at an angle of between 30° and
40° to the workpiece surface and guide back and forth over the workpiece in steady
movements.
8.2
Cutting:
When you use the right-angle grinder for cutting purposes, avoid tilting it in the cutting plane.
The cutting wheel must have a clean cutting edge. A diamond cutting wheel is best used to cut
hard stone. It is prohibited to use the machine on asbestos materials!
Never use a cutting wheel for rough grinding.
9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS AND
CUTTING WHEELS
9.1
Flange arrangements when using a depressed centre or straight grinding wheel
1 Clamping flange
2 Flange nut
9.2
Flange arrangement when using a depressed-centre cutting wheel