Powerplus POWX066 ANGLE GRINDER 2400W Ø230MM EN - Manual (Page 9)

POWX066 EN
Copyright © 2010 VARO p a g e | 9 www.varo.com
9.3 Flange arrangement when using a straight cutting wheel
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
§ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
§ Regularly clean the machine housing with a soft cloth, preferably after each use.
§ Keep the ventilation slots free from dust and dirt.
§ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication
The machine does not require any specific lubrication.
11 TECHNICAL DATA
Voltage / frequency 230V / 50Hz
Power input 2400W
No load speed 6000 min-1
Max. disc diameter: 230 x 22.2 mm
Drive spindle thread: M 14
Weight: 6 kg
Double insulated