Encore electronic Zilog Z8ENCORE000ZCO - Manual (Page 11)

Z8 Encore!
®
Flash Microcontroller Development Kit
User Manual
7
UM014605-0208 Installation
The 9 V DC universal power supply features three different plug configu-
rations, the power supply and a tool that aids in removing one plug con-
figuration to insert another.
Follow the steps below to substitute one plug configuration for another:
1. Using the removal tool, place the power supply in the round hole at
the top of the current plug configuration.
2. Press down to disengage the keeper tab and push the plug configura-
tion out of its slot.
3. Select the plug configuration of choice for your location, and insert it
into the slot left by the previous plug configuration.
4. Push the new plug configuration down until it snaps into place (see
Figure 4 ).
Figure 4. Inserting a New Plug Configuration