Encore electronic Zilog Z8ENCORE000ZCO - Manual (Page 12)

Z8 Encore!
®
Flash Microcontroller Development Kit
User Manual
8
UM014605-0208 Installation
Installing the ZDS II—Z8 Encore!
®
Software
Follow the steps below to install the software tools:
1. Load the ZDS II—Z8 Encore! Flash MCU CD into the CD-ROM
drive of the host PC. The CD launches DemoShield automatically
and provides a menu to install the product and documentation. Select
INSTALL PRODUCTS followed by INSTALL ZDS II to display
the Installation Wizard.
Software versions used in the following illustrations are for reference
only. You may have an updated version.
2. Click Next to continue with the installation. The License Agreement
appears.
3. Select Yes to accept the agreement and proceed with the installation.
4. After selecting Yes, the Choose Destination Location screen
appears. Follow the directions on the screen and choose whether to
install ZDS II in the default location or in some other folder. Click
Next
.
5. The Select Program Folder screen appears. Follow the on-screen
instructions and click Next .
6. After selecting Next, the Installation Wizard completes the
installation.
7. When the installation is complete, another screen appears asking you
to register the product online at www.zilog.com . To register at a later
time the registration link to the internet site is provided in the ZDS II
Help menu.
8. The following directory is installed on the host PC, assuming all
installation settings remain at their defaults:
C:/Program Files/ZiLOG/ZDSII_Z8Encore!_F640X_<Ver-
sion>.
Note: