Powerplus POWXQ5320 TILE CUTTER 750W 180MM EN - Manual (Page 3)

POWXQ5320
EN
Copyright © 2011 VARO P a g e | 3 www.varo.com
TILE CUTTER 750W
POWXQ5320
1 APPLICATION
Your tile cutter has been designed for cutting ceramic and clay paving and wall tiles. It is not
designed for professional use.
WARNING! When using electric tools basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal
injury including the following. Read all these instructions before attempting
to operate this product and save these instructions.
2 DESCRIPTION
1. Cutting blade
2. Dividing knife
3. Safety guard
4. On/of switch
5. PRCD
6. Rip guide
7. Rip guide scale
8. Rip guide knob
9. Miter guide
10. Miter guide scale
11. Miter guide knob
12. Overflow drain
13. Water reservoir
14. Stand
15. Cord retainer
16. Bevel table
17. Bevel table legs
18. 22.5° bevel notch
19. 45° bevel notch
20. Power cord
3 PACKAGE CONTENT LIST
§ Remove all packaging materials.
§ Remove remaining packaging and packing inserts (if included).
§ Check that the package contents are complete.
§ Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
§ Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
Tile saw content list (Fig 2)
manual 1pc
blade guard 1pc
blade wrench 2pcs
blade guard bracket 1pc
miter gauge assembly 1set
rip fence assembly 1set
overflow drain 1pc
small XQ catalogue Content list of stand (Fig 3)
support bracket A 1pc
support bracket B 1pc
stand with rubber foot A 2pcs
stand with rubber foot B 2pcs
let stand braces A 1pc
let stand braces B 1pc
bolt with nut 2sets
If any parts are missing or damaged, please contact your dealer.